ROM Communications Inc. (ROM) is a value added Internet Technology company focusing on web to wireless technology providing low cost high tech monitoring, tracking and remote control solutions for commercial, industrial and consumer applications.
Initially conceived as a R&D division of Total Telcom Inc. in 1998, ROM (an acronym for "Remote Orbital Monitoring") developed applications for the Environmental Services Industry using new wireless communication technologies such as Low Earth Orbiting (LEO) satellites. This research led to the development of a communication architecture that would interface Low Cost "Wireless Data Packet" Technology to the Internet for real-world applications. ROM was incorporated in 1999 and has made these services available for industrial applications on a limited basis.
Products and services are based on the Corporations proprietary hardware and software platforms which incorporate various wireless satellite and cellular communications managed by the end user through the Internet.
Applications include Remote Monitoring, Tracking, Control, Data Retrieval and Asset/Product management. While these concepts are not new and many are commercially available today, the technology presently being used is expensive, complicated and reserved for large corporations and industries. ROM's initiatives with new wireless technologies coupled with an Internet based management system creates a whole new market for these applications.
ROM Communications' "Web to Wireless" technology provides a link from a wireless device to a web based interface. By using technologies such as cellular networks, satellite networks, and Internet connectivity, ROM Communications is able to connect you to your data anywhere.
ROM’s approach of providing low cost high tech solutions means an initial low investment with reasonable operating charges (comparable to operating a cellular phone). ROM affordability makes Web to Wireless technology not only available for Commercial and Industrial applications but opens doors for small businesses and consumers to take advantage of this technology.
ROM removes the burden from our customers of maintaining dedicated servers, databases, backup systems and specialized software (only a web browser is required). Interaction by customers with their own web pages provides the ability to control operating parameters and alarm points, examine and retrieve data, and control remote devices.
Recognizing that people are not always “Online” and that many people may have limited or no access to the Internet, ROM’s products and services do not require Internet access to be beneficial to those who are "cyberly" challenged. Once set up, the user’s web page will interact with the primary server and deliver notification, reports and exception events directly to the user by e-mail, pager, fax, cellular and/or telephone.
ROM Communications provides a complete weather station solution using Davis Weather stations. Data is transmitted on a hourly or daily basis to provide an accurate picture of the current weather trends. The Davis Vantage Pro weather system includes Min/Max temperature, barometer, and humidity. Additional sensors are available, including solar radiation, rain counters, wind speed, and soil moisture analyzers. The weather station solution is available in both cellular (where signal is sufficient) and Iridium satellite based data transmission packages (worldwide).
The Weather Station hardware is contained in a NEMA 4 enclosure to provide protection against harsh weather conditions. Typical installation is through attachment to either a permanently mounted post or a secured tripod mount. Depending on the installed environment, the device is powered by a 20 - 30 Amp-hour battery and is charged using a 16 - 20 Watt solar panel and charge controller.
Data is displayed though a web interface with customizable data layouts and graphs. Optionally, data can be configured to be retrieved though a FTP interface for automated loading into proprietary or custom data analysis applications. Data can be configured for collection on a daily or hourly basis.
The Remote Weather Station package is available in both Cellular and Satellite editions. In addition to the hardware below, a data package is required.
Water is an important limited resource used in many aspects of life from direct consumption to food production. ROM Communications offers solutions to assist agricultural or scientific communities in managing this precious resource.
ROM can interface to various flow meters such as McCrometer or MACE meters to track water consumption, inflow, and outflow. Excessive usage or evaporation can be detected and problem areas can be identified. The EnviroWatch system is typically installed in a NEMA enclosure with batteries and a solar charging package.
Data is collected and transmitted daily, hourly, or at a more frequent rate based on the desired data collection and power consumption needs. It can also be configured to transmit at a more frequent rate if a condition is met (such as a high flow period). Data can be transmitted using either a GPRS or CDMA cellular system if the system will be located within range of a cellular tower, or by using the Iridium satellite network anywhere.
ROM Communications uses our EnviroWatch hardware platform in irrigation and water flow applications. In addition to flow monitoring, the telemetry package can be attached to other sensors such as soil moisture probes to determine the effectiveness of irrigation. The EnviroWatch system is designed for low power battery installs. A device will typically stay in a low power state until a pre-determined time when it will connect to the communications network to transmit the current state of the selected inputs. Over-air configuration of the device is available to select transmitted data registers or to specify transmission frequency. ROM Communications has experience with a wide variety of environmental or monitoring sensors and can recommend devices and power sources for your application.
Explore Demo
ROM Communications has developed the EnviroWatch series of devices to provide data acquisition for a large variety of environmental monitoring or study applications, including water quality monitoring. The EnviroWatch interface can be attached to many different sensors or probes to transmit the data important to your needs to a web interface, without requiring frequent on-site visits to retrieve. ROM Communication uses a variety of water quality sensors, including In-Situ TROLL probes and PT2X sensors. Properties such as turbidity, conductivity, level, and pressure can be monitored and used for alarm triggering.
The EnviroWatch system is designed for low power battery installs. A device will typically stay in a low power state until a pre-determined time when it will connect to the communications network to transmit the current state of the selected inputs. Over-air configuration of the device is available to select transmitted data registers or to specify transmission frequency. Installations may include solar panels, NEMA enclosures, or other accessories required to meet your monitoring needs. ROM Communications has experience with a wide variety of environmental or monitoring sensors and can recommend devices and power sources for your application.
Data is transmitted wirelessly to ROM communication's data center using either cellular technology or the Iridium satellite network and is displayed on a web interface. Additional features include voice and SMS alarms based on returned values, and report and graph generating. Data sampling can be configured for specific intervals and can enter a more frequent data collection mode by setting an "alarm" value on one of the parameters. Configuration of the device can be done through a direct connection to the system, or through a web interface to send over-air commands.
Check Performance
Collecting climate data can be a highly time consuming task, especially when data needs to be collected from regions that require hours of travel or even air/helicopter travel to retrieve. ROM Communications specializes in low power wireless communication over cellular or satellite networks.
ROM has experience collecting data from various sensors, including climate stations, soil moisture analyzers, and rainfall counters Data is transmitted over wireless networks and is collected in ROM's data center. Data is accessed through ROM's secured web-based interface, including graphing, reporting, and email/SMS/voice alarms. ROM Communications also has a Weather Station package that includes temperature, rainfall, and other climate related sensors.
ROM Communications uses cellular networks and the Iridium satellite network to provide global communication coverage. By providing global service, climate research data can retrieved frequently without the expense of site visits.
ROM Communications has experience with a wide variety of environmental and monitoring sensors, and can recommend or design solutions for your specific application. The EnviroWatch system is designed for low power operation requirements.
Access to accurate and timely data is an important part of any project or scientific study. ROM Communications specializes in transferring data wirelessly from remote locations via cellular or satellite networks to eliminate the travel costs of manually retrieving data.
ROM Communications specializes in interfacing with a wide variety of samplers and sensors, and transmitting data and event based alerts wirelessly. ROM Communications uses the Iridium satellite network to provide communication when data is collected beyond the range of cellular networks. By providing global service, climate research data can retrieved frequently without the expense of site visits. Two-way control is available to remotely trigger sampling systems via over-air commands on demand.
Data is sampled and collected on a scheduled interval and can be changed over-air if desired. The system can also be configured to retrieve data more frequently based on selected conditions (such as a parameter being outside of an expected range). ROM Communications' system can also trigger voice, SMS, or email alerts based on selected alarm conditions.
ROM Communications uses our EnviroWatch hardware platform for water and environmental applications. For more information, look at our Water Quality Monitoring package. Please contact our sales team to discuss your remote telemetry needs.
VMS is a satellite based, near real time, positional tracking system. These devices consist of a Global Positioning System (GPS) and a satellite data transmitter that provides information on the vessel name, locations and activity. License conditions in certain fisheries require that fishing vessels carry a VMS unit approved by Fisheries and Oceans Canada. VMS is not intended to replace existing mandatory safety equipment.
A VMS unit is about the size of a small radio with an antenna. Data is sent to a satellite orbiting the earth, relayed to a station on the ground and then sent to the designated vessel-monitoring centre in near real time or at a pre-determined time intervals. VMS units are available with a backup battery that allows it to continue to operate in the event of a vessel power failure.
Conservation:
Please visit the webstore for current hardware pricing.
Text Anywhere service is provided with all of our VMS plans, including 2-way cell text message and email service. Using any modern web browser on a laptop or smart phone, you can send and receive text messages from your vessel to any email address or any north american cell number. Click here for more information about Text Anywhere.
ROM's 'Friends and Family' website allows loved ones to locate your vessel's last known position and display it on a interactive map using a browser. This feature requires a password, which is supplied after you purchase a ROMTraX Wi-Fi unit. You can check out the 'Friends and Family' website by clicking here.
You can purchase a ROMTraX 24 hours a day by clicking on the 'Buy it Now' button below or call us at 1-877-860-3762, ext 200 from Monday-Friday 8:30am - 4:30pm Pacific Time. Buy Now A list of approved units is available on Fisheries and Oceans Canada's website. http://www.dfo-mpo.gc.ca
The ROMTraX asset tracking device allows you to track the location and movement of vehicles or other mobile assets. Basic features include current location tracking and virtual odometer. The ROMTraX system also is able to track over-speed conditions and has two digital counters to use to monitor PTO or engine runtime. The ROMTraX solution takes advantage of satellite technology for all communications, allowing asset tracking and communication worldwide including remote areas without cellular coverage.
The ROMTraX device utilizes a sensitive SiRF III GPS receiver to quickly acquire and maintain a GPS lock on your vehicle. Data is transmitted over the Iridium satellite network within seconds to report on the device's position on a configurable interval. The device is self-contained in a UV stabilized enclosure that is magnetically or screw mounted to the vehicle. Installation can be completed in less than an hour, including wiring.
Fleet data is displayed on a web site accessible using any standard web browser. An overview of all vehicles can be displayed, or a history of movement for a single vehicle can be queried. GPS position reports are sent on an interval while the vehicle is in motion. Current vehicle position and report frequency can also be retrieved or configured by or be requested by over-air commands. The ROMTraX system includes a virtual odometer to monitor usage and maintenance, as well as hour meters to monitor device runtime.
The ROMTraX fleet package can be ordered with a touch screen GUI interface (FLT-002) to run the ROMTraX Companion software package. This package adds the following features:
The ROMTraX solution uses a proactive approach to monitoring as opposed to using a reactive monitoring solution. Reactive solutions such as personal motion sensors can be susceptible to interference or false negative detection. The ROMTraX solution uses a proactive approach requiring positive feedback from the monitored person to ensure their safety.
The ROMTraX platform can be customized to meet your exact needs. In addition to vehicle tracking, the ROMTraX platform has been modified to track trailers, ships, and even ice flow movement.
In recent times, safety legislation has become stricter on requirements for protect employees working alone. One accepted method of monitoring employees working alone is to use an electronics monitoring system. The ROMTraX Fleet Management package includes work-alone and fleet tracking features that meet your needs.
To meet legislated work and safety needs, the ROMTraX work-alone solution has the following features:
The ROMTraX solution uses a proactive approach to monitoring as opposed to using a reactive monitoring solution. Reactive solutions such as personal motion sensors can be susceptible to interference or false negative detection. The ROMTraX solution uses a proactive approach requiring positive feedback from the monitored person to ensure their safety.
The ROMTraX system includes a fully featured fleet management system. In addition to work-alone, the system features an electronic driver log application and vehicle inspection pre-post trip checklist system to help manage other possible compliance requirements. It also includes a geofence security system to prevent unauthorized use, a web interface to show your fleet's locations, and can also be used with navigation software.
The ROMTraX management system can be customized to meet your company's exact needs. Please contact our sales team to help develop your exact system requirements.
The ROMTraX Fleet Management solution provides interaction, protection and manageability, simply and cost effectively. Customers will be able to access data about their mobile assets from any location with web access at any time. The complete solution combines a ROMTraX GPS tracking system with a handheld PDA user interface. ROM's ROMTraX system utilizes Web to Wireless technology to keep track of where the mobile asset is, what speed it is traveling, and records and reports additional vital information. By pre-selecting parameters, clients can choose the circumstances under which a vehicle will report. Affordable ROMTraX technology is what ROM brings to market, allowing customers other then large corporations to justify the purchase of such technologies.
With legislation and safety considerations changing, the need for work-alone compliance solutions is growing. ROM Communications has developed a work-alone package that can be integrated into fleet vehicles to aid in the safety of employees. The ROMTraX Fleet Management solution provides an all-in-one fleet management, work-alone, and driver log compliance package.
The ROMTraX fleet system uses the Iridium satellite network to provide tracking or monitoring in even the most remote areas.
Utilizing Web to Wireless technology the heavy equipment industry can know exactly where their assets are as well as how long it has been moving or stationary. In addition a wide variety of sensors can be monitored. Armed with this specific information customers can proactively manage their assets to ensure greater reliability and profitability.
The ROMTraX solution is an all-in-one package that is magnetically mounted to your vehicles. Installation simply requires a power connection.
The ROMTraX tracking solution is a self-contained, easy to install package that requires only a power connection and clear view of the sky to operate. In additional to vehicle tracking, the ROMTraX fleet solution can also be applied to water-based applications.
In a rental scenario, the ROMTraX system adds value to your rental equipment while adding safety and security to your assets. The ROMTraX system transmits data using the Iridium satellite network, allowing for tracking globally, including in remote areas without cell phone coverage. The system reports its position on a pre-defined schedule when the vessel is in motion. By knowing the exact location of a vessel, staff can be easily directed it for repairs or emergencies. In addition to current location, the ROMTraX system can be connected to ship-board sensors to report on battery, fuel, or other systems to allow for remote system diagnostics. Vessels can be monitored for regulation compliance, such as travel boundaries or travel time restrictions. Notifications can be generated and sent to company personnel by email, SMS, or voice calls if a vessel exists a boundary or travels during inappropriate times (such as night if restrictions exist).
ROM Communications has updated and certified its vessel monitoring system (VMS) currently in use for commercial fishing compliance to use the ROMTraX hardware platform. In addition to compliance tracking and compatibility with the catch report e-log software, the ROMTraX system is also compatible with short satellite email messaging. The VMS-9601 can be purchased at our web store.
For more information, please contact our sales team.
ROM Communications has developed a fault monitoring solution for monitoring power underground and aerial circuit over-current faults for utility or other providers. Using an optical sensor coupled to existing 3rd party devices, the device monitors the fault switch LEDs for error conditions. Upon a fault trip, the fault monitor wakes from a low power state and transmits a status message. This message can be tied to ROM's alarming system and web interface, or connected to the end user's SCADA system. By reporting the exact nature of the fault (specific phase/leg), deploying resources to respond can be achieved faster.
The fault trip monitoring solution utilizes a battery powered system to provide reliability in a power outage, while eliminating the need for a more costly transformer siphon on the high-power transformer. The fault trip monitor is capable of running up to 2 years on a set of standard lithium batteries. The monitor uses an optical sensor to determine the state of the fault indication switches.
The ROM fault trip monitoring system transmits a heartbeat status every few days to ensure the device is operating correctly. If a power event occurs, the device wakes up and transmits changes in the fault states. When an event ends, an all-clear signal is sent, and the device returns to its normal low power state. The system uses a cellular GPRS connection to transmit changes in state. Up to 12 fault trip switches can be monitored simultaneously per device. Data display is available through a web interface, or alternatively, connected to a SCADA system through a MODBUS TCP connection using a custom client application
ROM's power monitoring solution can interface with modbus based power meters, including ION meter systems. ROM Communications can provide assistance in selecting an appropriate metering system for your need, or interface with an existing power system. Key electrical properties such as peak kWh and other power usage properties can help identify time periods where energy can be used more efficiently, such as power reduction at night or power reduction during peak usage times.
In addition to monitoring power meters, the ROM metering solution can monitor any MODBUS device or pulse meter devices, such as water or gas meters. By metering additional devices, the full resource usage of your facility can be monitored.
Data is transported periodically through the day and is displayed on a web interface. The web features user access controls, SMS/email/voice alarm notifications, graphing, and report generation. Data can also be transported to an existing power application using a FTP or other data transport service.
ROM Communications' hardware platforms can be modified or expanded to meet your exact needs. In addition, ROM is currently developing a second generation of power monitor products, allowing for a friendly touch screen user interface, improved over-air updates, and additional troubleshooting tools. Please contact our sales department for more information or to discuss your power monitoring needs.
ROM's Web to Wireless technology enables you to cost effectively monitor your remote assets from your PC. From water distribution systems to sanitary lift stations, from utility meters to water quality equipment, ROM's Web to Wireless technology can provide the information you need to operate your business more effectively. ROM Communications uses both cellular and satellite technology to provide service across Canada, the United States, and beyond. With Iridium satellite technology, ROM's monitoring solutions can be provided anywhere in the world.
Municipalities and businesses need to monitor water, irrigation, and waste systems for high or low levels and alert maintenance personnel for a proactive response. Many pumps, pressure reducing valves (PRV) and other valves are left unchecked for long periods at a time because of their remote locations. With Web to Wireless monitoring solutions, operation centers will be able to monitor and control these devices from any PC with Internet access. Townships, Cities and municipalities often are not aware of water pressure and flow rate changes that could assist with forecasting future problems and scheduling of maintenance personnel. ROM's wireless monitoring solutions for municipalities has the ability to be retrofitted to most monitoring, measuring and sensing devices used within their operations Municipalities require a cost effective means of monitoring and retrieving data from various pumps, valves and mechanical equipment located in remote locations. ROM's monitoring solution is a cost-effective high-tech wireless monitoring solution designed for Remote Data Retrieval and Exception Notification for potable and waste water equipment used within villages, towns, districts and municipalities. SCADA systems are costly and at times are much more than what is required for the job at hand. If you have an investment in a SCADA system ROM's Web to Wireless technology can be used to compliment the SCADA system in areas where radio networks and traditional landlines are not available allowing your operations center to monitor for exception reports.
The ROM Network was designed with an open architecture allowing the end users to apply Web to Wireless technology to many applications. ROM's hardware solutions can easily be retrofitted to almost any monitoring, measuring and sensing equipment. Along with ROM's technical staff, end users will be able to customize our Web to Wireless technology to meet even the most challenging problems at hand. Both the EnviroWatch and MicroCom Remote Telemetry solutions can be configured or can be retrofitted to connect to virtually any sensor or communications protocol. Please Contact our sales team so we can match our products to your needs.
ROM Communications has interfacing solutions for power, water and gas monitoring/metering systems, including building automation equipment. By monitoring a building's complete energy consumption system, ROM can help your company eliminate inefficient power usage and detect peak power consumption times to identify where the most energy savings can be made.
ROM's power monitoring solution can interface with many industry standard smart power meters, including modbus based power meters and ION power meter systems. ROM Communications can provide assistance in selecting an appropriate metering system for your need, or interface to an existing power system. Additionally, ROM Communications is able to monitor power fault systems to detect power failures or power spike problems.
A complete power metering system needs to factor heating fuel in addition to electrical power consumption. By using pulse counters, the full power consumption picture can be calculated. Fuel meters can also be used to verify utility billing.
ROM's hardware systems are designed with an open architecture allowing the end users to apply web to wireless technology to many applications. The system can easily be retrofitted to almost any monitoring, measuring and sensing equipment. Along with ROM's technical staff, end users will be able to customize our web to wireless technology to meet even the most challenging problems at hand.
ROM's Web to Wireless technology enables you to cost effectively monitor your remote assets from your PC. From oil pipelines to gas wellheads, from utility meters to HVAC equipment, ROM's Web to Wireless technology can provide the information you need to operate your business more effectively. ROM Communications uses both cellular and satellite technology to provide service across Canada, the United States, and beyond. With Iridium satellite technology, ROM's monitoring solutions can be provided anywhere in the world.
The HVAC/R monitoring solution is a cost-effective high-tech wireless monitoring solution designed for Remote Data Retrieval and Notification and Remote Control of mechanical equipment used in the HVAC/R industry and to alert owners, service contractors and facility managers of failures and conditions of the equipment. The HVAC/R industry requires a cost effect means of monitoring and retrieving data 7 x 24 hours from their mechanical equipment. Utilizing Web to Wireless technology owners, service contractors and facility managers can access current operating levels, maintenance schedules, monthly operational reports and operating history analysis. The HVAC/R monitoring solution enables HVAC/R contractors to provide significantly improved customer service via drastically shortened response times The HVAC/R monitoring solution connects to sensors installed on HVAC/R equipment. When any data measurement falls outside the user-established operating parameters, the MicroCom system automatically sends an event notification to the ROC (ROM Operations Centre). Then, following a pre-determined protocol the ROC sends failure or monitoring information with the unit’s location and status directly to designated communication device and/or repair personnel.
The ROM Network was designed with an open architecture allowing the end users to apply Web to Wireless technology to many applications. ROM's hardware solutions can easily be retrofitted to almost any monitoring, measuring and sensing equipment. Along with ROM's technical staff, end users will be able to customize our Web to Wireless technology to meet even the most challenging problems at hand. Both the EnviroWatch and MicroCom Remote Telemetry solutions can be configured to access MODBUS based systems, or can be retrofitted to connect to virtually any sensor or communications protocol. Please contact our sales team so we can match our products to your needs.
Using the EnviroWatch platform, ROM Communications is able to remotely connect to a wide variety of electronic gas flow meters, such as FloBoss, SCADAPak, ABB meters, or any meter that provides a serial or modbus protocol as its communication method. Additionally, the EnviroWatch system can read values through an analog input. Using industry standard meters, the remote gas flow monitor system is able to return standard parameters for AGA calculations or to report daily production or flow values. By using a gas flow monitoring system, field production records can be maintained for reporting or compliance purposes. Additionally, equipment problems or failures can be detected to reduce costly downtime.
ROM Communications uses the Iridium satellite network's 100% global coverage to provide remote communications anywhere it is needed. By remotely metering gas flow, travel expenses and operator site visits can be reduced. The remote telemetry package is typically installed in a weatherproof NEMA 4 enclosure and securely mounted on a post or existing site facility. A solar panel and battery system can be provided where power is not readily available.
ROM Communications uses our MicroCom or EnviroWatch hardware platforms in modbus or metering systems. In addition to flow monitoring, the telemetry package can be attached to other types of sensors to provide any other data required for your remote needs. Please contact our sales team to discuss your remote telemetry needs.
ROM Communications specializes in remote monitoring solutions, including monitoring pumpjack operations. Data is transmitted from the pumpjack site to ROM's online web interface, which includes features such as data graphing, alarming, and reporting. Using the web portal interface, data from multiple sites can be compared. The primary benefits are:
From the comfort of an internet connected office, an operator can view the status of an entire network of pumpjack operations with a single click. Runtime and current status can be determined and recorded.
ROM's wireless telemetry systems use the Iridium satellite network to allow monitors to be deployed in the most remote locations, or use cellular networks when within cell network range. If desired, other sensor packages can be monitored in addition to the pumpjack to meet your exact needs. Please contact our sales department for more information.
ROM Communications has experience in remotely monitoring down-hole instrumentation such as temperature, pressure, aquifer levels, observation wells, or pump controls. Remotely monitoring down-hole instrumentation is an effective way to detect or prevent problems early, such as detecting low fluid levels to prevent pump burnout, or to monitor pressure or temperature to gauge the effectiveness of thermal or steam processes. ROM's network has a rapid SMS, email, and voice alert system to notify support personnel if sensors report an event condition. Detecting and responding to problems quickly is key to protecting expensive equipment.
The benefits of a remote solution are:
Using the Iridium satellite network, the EnviroWatch or MicroCom remote telemetry systems can be installed anywhere. ROM Communications has experience designing and developing remote power and communications systems in the harshest weather conditions. Please contact our sales team to discuss your remote monitoring needs.
ROM’s MicroCom Remote Telemetry device is a combination of proprietary hardware and software, which provides "web to wireless" low cost high tech remote monitoring, tracking, data retrieval, and asset management for commercial, industrial, small business and consumer applications. The MicroCom Remote Telemetry device is compact and incorporates a wireless communication device, a small but powerful microcomputer and various Inputs / Outputs. The Industrial version also includes a variable input DC-DC converter, battery back up and a charging system. The MicroCom Software controls how the application is interfaced to the communication device, this intuitive Graphical User Interface (GUI) easily guides the user through the set up process. Each Input and Output is individually configured to meet the needs of the application. Parameters such as alarm conditions, high and low limits and timing intervals are easily entered in the GUI. MicroCom software is available for Windows XP systems. Data is processed by ROM's Operations Centre (ROC) and distributed through the Internet to the end-user. In doing the processing at the server, low cost sensors can be used in place of "smart" sensors or high cost data loggers. The raw data is processed at the server end, allowing the end-user to adjust filtering and co-efficient from a web interface. Standard Features:
The MicroCom Remote Telemetry system is designed to interface with peripherals such as GPS receivers, measuring instruments, various sensors and electrical mechanical devices. It is able to send or receive commands originating from the Internet or the application based on the user-defined configuration.
The MicroCom system was designed with an open architecture allowing the end users to apply web to wireless technology to many applications. The MicroCom system can easily be retrofitted to almost any monitoring, measuring and sensing equipment. Along with ROM's technical staff, end users will be able to customize our web to wireless technology to meet even the most challenging problems at hand.
Explore Demo
ROM Communications has developed the EnviroWatch series of devices to provide data acquisition for a large variety of environmental tracking or study applications. The EnviroWatch interface can be attached to many different sensors or probes to transmit the data important to your needs to a web interface, without requiring frequent on-site visits to retrieve. Standard Features:
The EnviroWatch system is designed for low power battery installs. A device will typically stay in a low power state until a pre-determined time when it will connect to the communications network to transmit the current state of the selected inputs. Over-air configuration of the device is available to select transmitted data registers or to specify transmission frequency. ROM Communications has experience with a wide variety of environmental or monitoring sensors and can recommend devices and power sources for your application.
Explore Demo
ROM Communication specializes at providing custom solutions to your remote data needs. From power meters to ice flow tracking, ROM Communications can aid in interfacing ROM's wireless cellular or satellite communication systems to almost any monitoring, measuring and sensing equipment..
Often, an off-the-shelf product doesn't exactly meet the needs for a project. Along with ROM's technical staff, end users will be able to customize our Web to Wireless technology to meet even the most challenging problems at hand.
Interaction by customers with their own customized web pages provide the ability to control operating parameters and alarm points, examine and retrieve data, and control remote devices. Easy to use and interactive web pages linked to an industrial database make checking the temperature and the status of the hot water tank at the cottage easier than paying bills on-line.
Interesting in selling wireless services for your equipment? ROM Communications can logo and brand our products to match your corporate colors or logos. We can create custom data portals as necessary to create your own wireless solution.
ROM Communications Inc., a Microsoft Certified Solutions Provider (MCSP) has the technical resources to provide a full range of custom application and database integration services.
